NF Series

NF Series 5-Face Bridge Type CNC Milling Machining Center
  • NF series, a bridge-type 5 face machining center, is one of the most attractive products of Vision Wide, for its linear guideways and Z-axis box way.

    Positioning accuracy could reach ±0.005/300 mm (JIS B6333).

    NF satisfies various demands in mold surface cutting, angles cutting, 3D mold cutting, and precise contour finishing, and it also completes automatic 5-face machining with specially designed accessories such as tool center point compensation, auto multi-angle head attachments, and auto tool change system.

    • High rigidity box base, best span work table guideways, and wider load dimension ensured the best level of dynamic accuracy.
    • Cross-section square beam enabled the centroid of the head close to the beam center to ensure the heavy cutting ability.
    • Fully auto 5-face machining capacity
      • Auto head change: 90º head/extension head / universal head
      • Vertical and horizontal auto tool change for 90º head.
      • AC 3-axis mechanical coordinates system
  • Model Unit NF-3023 /NF-3030 NF-4023 /NF-4030 NF-5023 /NF-5030 NF-6023 /NF-6030 NF-8023 /NF-8030 NF-10023 /NF-10030
    X axis travel mm 3,100 4,100 5,100 6,100 8,100 10,100
    Y axis travel mm 2,300/ 3,000
    Z axis travel Box way / Single ballscrew mm 920 / 1,020(Opt.)
    Linear way & enclosed box ram / dual ballscrews mm 1,000(Opt.) / 1,200(Opt.) / 1,400(Opt.)
    Table size mm 3,000×2,050 4,000×2,050 5,000×2,050 6,000×2,050 8,000×2,050 10,000×2,050
    Max. table load kg 13,000 16,000 20,000 22,000 24,000 26,000
    Spindle motor power(cont./30 min. rated) kW 18.5/22(22/26Opt.)(30/37Opt.)
    Spindle speed Box way / Single ballscrew 2-step gear rpm 4,000 / 6,000(Opt.)
    Linear way & enclosed box ram / dual ballscrews 2-step gear rpm 4,000 / 6,000(Opt.)
    Direct-driven rpm 10,000(Opt.)
    Cutting feed rate mm/min 1-10,000 1-7,000
    Rapid traverse (X/Y/Z) X/Y(Y+700) m/min 24 18 12.5 10 8
    Z axis  Box way / single ballscrew
    Linear way / dual ballscrews
    m/min 15
    Enclosed box ram / dual ballscrews m/min 12
    ATC capacity Vertical type tool change pcs 32 / 40 (Opt.) / 60 (Opt.)
    Floor-standing vertical type tool change pcs 32(Opt.) / 40 (Opt.) / 60 (Opt.)
    Floor-standing vertical-horizontal type tool change pcs 32(Opt.) / 40 (Opt.) / 60 (Opt.)

    Model Unit NF-3026 /NF-3033 NF-4026 /NF-4033 NF-5026 /NF-5033 NF-6026 /NF-6033 NF-8026 /NF-8033 NF-10026 /NF-10033
    X axis travel mm 3,100 4,100 5,100 6,100 8,100 10,100
    Y axis travel mm 2,600/ 3,300
    Z axis travel Box way / Single ballscrew mm 920 / 1,020(Opt.)
    Linear way & enclosed box ram / dual ballscrews mm 1,000(Opt.) / 1,200(Opt.) / 1,400(Opt.)
    Table size mm 3,000×2,450 4,000×2,450 5,000×2,450 6,000×2,450 8,000×2,450 10,000×2,450
    Max. table load kg 13,000 16,000 20,000 22,000 24,000 26,000
    Spindle motor power(cont./30 min. rated) kW 18.5/22(22/26Opt.)(30/37Opt.)
    Spindle speed Box way / Single ballscrew 2-step gear rpm 4,000 / 6,000(Opt.)
    Linear way & enclosed box ram / dual ballscrews 2-step gear rpm 4,000 / 6,000(Opt.)
    Direct-driven rpm 10,000(Opt.)
    Cutting feed rate mm/min 1-10,000 1-7,000
    Rapid traverse (X/Y/Z) X/Y(Y+700) m/min 24 18 12.5 10 8
    Z axis  Box way / single ballscrew
    Linear way / dual ballscrews
    m/min 15
    Enclosed box ram / dual ballscrews m/min 12
    ATC capacity Vertical type tool change pcs 32 / 40 (Opt.) / 60 (Opt.)
    Floor-standing vertical type tool change pcs 32(Opt.) / 40 (Opt.) / 60 (Opt.)
    Floor-standing vertical-horizontal type tool change pcs 32(Opt.) / 40 (Opt.) / 60 (Opt.)

    Model Unit NF-3032 /NF-3039 NF-4032 /NF-4039 NF-5032 /NF-5039 NF-6032 /NF-6039 NF-8032 /NF-8039 NF-10032 /NF-10039
    X axis travel mm 3,100 4,100 5,100 6,100 8,100 10,100
    Y axis travel mm 3200/ 3,900
    Z axis travel Box way / Single ballscrew mm 920 / 1,020(Opt.)
    Linear way & enclosed box ram / dual ballscrews mm 1,000(Opt.) / 1,200(Opt.) / 1,400(Opt.)
    Table size mm 3,000×2,450 4,000×2,450 5,000×2,450 6,000×2,450 8,000×2,450 10,000×2,450
    Max. table load kg 13,000 16,000 20,000 22,000 24,000 26,000
    Spindle motor power(cont./30 min. rated) kW 18.5/22(22/26Opt.)(30/37Opt.)
    Spindle speed Box way / Single ballscrew 2-step gear rpm 4,000 / 6,000(Opt.)
    Linear way & enclosed box ram / dual ballscrews 2-step gear rpm 4,000 / 6,000(Opt.)
    Direct-driven rpm 10,000(Opt.)
    Cutting feed rate mm/min 1-10,000 1-7,000
    Rapid traverse (X/Y/Z) X/Y(Y+700) m/min 24 18 12.5 10 8
    Z axis  Box way / single ballscrew
    Linear way / dual ballscrews
    m/min 15
    Enclosed box ram / dual ballscrews m/min 12
    ATC capacity Vertical type tool change pcs 32 / 40 (Opt.) / 60 (Opt.)
    Floor-standing vertical type tool change pcs 32(Opt.) / 40 (Opt.) / 60 (Opt.)
    Floor-standing vertical-horizontal type tool change pcs 32(Opt.) / 40 (Opt.) / 60 (Opt.)

    ※Please contact sales for more details.


  • Standard Accessory & Function
    1. FANUC 0iMF PLUS controller
    2. Box way 4,000rpm 2-step gear type spindle
    3. Z axis travel 920mm (Box way)
    4. Spindle cooling system
    5. Air blast through spindle
    6. Footswitch for tool clamping
    7. XYZ-axis absolute pulse coder feedback
    8. XYZ-axis travel hard limits protection
    9. Twin hydraulic cylinders with pressured nitrogen assistance counterweight system
    10. X, Y-axis ballscrew support device (X axis ≧ 4 m,Y axis ≧ 3 m)
    11. Cutting fluid cooling system
    12. Centralized auto lubrication system
    13. Independent lubrication oil collector
    14. Vertical type tool magazine 32 tools
    15. Enclosed sheet metal guard without roof (NF series X axis ≦ 6 m)
    16. Four piece sheet metal guard (NF series X axis ≧ 8 m) (all HF series)
    17. Swiveling arm type operation panel
    18. Movable manual pulse generator
    19. Screw type chip conveyor on table sides
    20. Caterpillar type chip conveyor / Water tank
    21. Heat exchanger for electrical cabinet
    22. Wash gun and pneumatic interface
    23. Vision Wide FX graphical user interface
    24. Auto power off function
    25. RJ45 interface
    26. Working lamp
    27. Operation cycle finish and alarm light
    28. Spindle overloading protected by software
    29. Foundation pads and bolts kits
    30. Adjustment tool and tool kits
    31. Technical manuals (operation, maintenance manual and circuit diagram)
    Optional Accessory & Function
    1. FANUC 31 iB / HEIDENHAIN TNC 640 / SIEMENS 828D / SIEMENS ONE / MITSUBISHI M80 TypeA / MITSUBISHI M830
    2. Box way 6,000 rpm 2-step gear type spindle
    3. Linear way/enclosed box ram 4,000/6,000 rpm 2-step gear type spindle
    4. Linear way/enclosed box ram 10,000/12,000 rpm direct driven type spindle
    5. Z axis travel 1,020 mm (Box way)
    6. Z axis travel 1,000/1,200/1,400 mm (Linear way/enclosed box ram)
    7. Column heighten 200/400/600/800 mm
    8. Spindle ring cutting coolant device (for no head attachment)
    9. Coolant through spindle system 20/70 bar
    10. The interface of coolant through spindle
    11. Coolant through tool holder interface
    12. Switch for tool clamping
    13. Spindle and structure temperature thermal compensation system (STC)
    14. XYZ-axis linear scale feedback
    15. Oil skimmer
    16. Oil mist cooling device
    17. Oil mist recycle device
    18. Vertical type tool magazine 40/60 tools
    19. Floor-standing vertical type tool magazine 32/40/60 tools
    20. Floor-standing vertical-horizontal type tool magazine 32/40/60 tools
    21. Wireless remote control manual pulse generator
    22. Four piece sheet metal guard (NF series X axis ≦ 6 m)
    23. Enclosed sheet metal guard without roof (NF series X axis ≧ 8 m) (all HF series)
    24. Enclosed sheet metal guard with roof (NF series X axis ≦ 6 m) (not for NF-xx32/39 and HF series)
    25. 3-axis independent manual pulse generator (only for FANUC)
    26. Helical bladed screw conveyor on table sides
    27. Chip cart
    28. Air conditioning for electrical cabinet
    29. Auto measurement system
    30. Rotary table
    31. Sub working table
    32. Interface reserved for fourth axis
    33. Transformer
    34. Auto warm up
    35. Tool axis retract function at power failure


  • NF Series

    NF-Heavy cutting

    NF-2-axis head-Mold Base Drilling Application